Support forum: If you have trouble regarding µOLED-32024-P1(SGC), please visit our specific forum here.
The uOLED-32024-P1(SGC) is a 2.4" size compact and cost effective all in one ‘SMART” serial display modules using the latest state of the art Active Matrix OLED (AMOLED) technology with an embedded PICASO-SGC serial graphics controller that delivers ‘stand-alone’ functionality to any project.
Powerful graphics, text, image, animation and countless more features are built inside the module. It offers a simple yet effective serial interface to any host micro-controller that can communicate via a serial port. All screen related functions are sent using a simple protocol via the serial interface.
The serial platform allows users to develop their application using their favourite micro-controller and software development tools. In short, the uOLED-32024-P1(SGC) display module offer one of the most flexible embedded graphics solutions available.
Note: The PICASO processor on the Display module can be re-programmed with the latest PmmC configuration for updates and future proofing. This process requires the use of a USB converter that uses the DTR signal to pulse the Reset line on the processor, such as any one of the following 4D Programming modules:
Warranty Note: PmmC or 4DGL programming should only be carried out using any one of the 4D Programming modules (4D Programming Cable, uUSB-MB5, uUSB-CE5). Any malfunction because of custom or third party USB to Serial converters or Serial(RS232) to Serial(TTL) level converters will void the warranty.
It also applies to all 4D products which require an interface from the PC to the module for testing using 4D Software Test Tools.
It applies to all the purchases on or after 1st of July 2011.
Low-cost OLED display graphics user interface solution.
240 x 320 QVGA resolution, 65K true to life colours, AMOLED screen.
Screen Size: 2.4”, 42mm x 52.6mm with Viewing Area: 36.7mm x 49mm
Controller board (49.1 x 67.3 x 11.0mm) with mechanical support via mounting tabs which can be snapped off.
No back lighting with near 180° viewing angle.
Easy 5 pin interface to any host device: VCC, TX, RX, GND, RESET.
Asynchronous hardware serial port, TTL interface, with 300 baud to 256K baud.
Powered by the 4D-Labs PICASO-SGC processor (also available as separate OEM IC for volume users).
On-board micro-SD memory card adaptor for multimedia storage and data logging purposes. HC card support is also available for cards 4Gb and larger.
DOS compatible file access (FAT16 format) as well as low level access to card memory.