**This product is NOT RECOMMENDED for new designs, and has been superseeded by the new μLCD-28PTUmodule**
The µLCD-28PT(GFX) showcases a 2.8’’ LCD Touch screen, which packs a dense number of pixels in a small area making it one of the most attractive products in the micro-LCD (µLCD) range. Bringing the 240x320 resolution screen to life is the PICASO-GFX2 processor, capable of displaying captivating text, clever animations and colourful images. Complimenting the display is an assortment of attractive peripherals including; PWM audio, a micro-SD memory card socket, multiple I/O ports, serial comms and more. Behind the scenes of the µLCD-28PT(GFX) is a unique PCB backing with three mounting tabs and expansion headers, which makes it ideal for custom enclosures and additional hardware interfacing. Coming in as the second smallest screen in the PICASO-GFX2 µLCD range, the µLCD-28PT(GFX) serves as the perfect small-to-medium sized solution for any embedded graphics display need.
Note: This product is designed to be a close replacement of the uOLED-32028-P1T(GFX) module.
Note: The PICASO processor on the Display module can be re-programmed with the latest PmmC configuration for updates and future proofing (as well as 4DGL program downloads). This process requires the use of a USB converter that uses the DTR signal to pulse the Reset line on the processor, such as any one of the following 4D Programming modules:
Warranty Note: PmmC or 4DGL programming should only be carried out using any one of the 4D Programming modules (4D Programming Cable, uUSB-MB5, uUSB-CE5). Any malfunction because of custom or third party USB to Serial converters or Serial(RS232) to Serial(TTL) level converters will void the warranty.
It also applies to all 4D products which require an interface from the PC to the module for testing using 4D Software Test Tools.
It applies to all the purchases on or after 1st of July 2011.
Low-cost 2.8" LCD-TFT display graphics user interface solution.
240 x 320 QVGA resolution, RGB 65K true to life colours, TFT screen.
Integrated 4-Wire resistive Touch Panel.
Easy 5 pin interface to any host device: - VCC, TX, RX, GND, RESET.
Powered by the 4D-Labs PICASO-GFX2 processor (also available as separate OEM IC for volume users).
14KB of Flash memory for user code storage and 14KB of SRAM for user variables.
2 x Asynchronous hardware serial ports (COM0, COM1), TTL interface, with 300 baud to 256K baud.
1 x I2C interface (Master).
8 x 16 bit timers with 1 millisecond resolution.
13 x General Purpose I/O pins. Upper 8 bits can be used as an I/O Bus for fast 8-bit parallel data transfers.
On-board micro-SD memory card adaptor for multimedia storage and data logging purposes. HC memory card support is also available for cards larger than 4GB.
DOS compatible file access (FAT16 format) as well as low level access to card memory.
Quick Start Guide: The Quick Start Guide should be the first point of contact upon receiving a uLCD-28PT(GFX). It is aimed at teaching the essentials in an informative, yet succinct manner: - PICASO-GFX2-Modules-QSG-rev1.pdf
PmmC File: The PmmC file contains the low level micro-code information (analogy of that of a soft silicon) which define the characteristics and functionality of the PICASO-GFX2 processor. The chip-resident 4DGL functions are part of the PmmC configuration file and future proofing and enhancements are available via PmmC updates. The PmmC file is programmed into the uLCD-28PT(GFX) module via the COM0 serial port. - uLCD-28PTGFX-R32.pmmc (OTM3225 Driver IC) - uLCD-28PT-I-GFX-R32.pmmc (Latest ILI9325 Driver IC) - uLCD-28PT-IS-GFX-R32.pmmc(Latest ILI9341 Driver IC) - PICASO-GFX2-ReleaseNotes-R32 (Replace the Compiler V 184.108.40.206 before using R32 PmmCs.)
PmmC-Loader Software Tool: Windows based software tool to program the PmmC file into the PICASO-GFX2 processor. - PmmC-Loader Tool link
4D-Workshop3 IDE Tool: This is a free software tool for Windows. The 4D-Workshop3 IDE provides an integrated software development environment for PICASO-GFX2 processor and associated display modules. The IDE combines the Editor, Compiler, Linker and DownLoader to develop complete 4DGL application code. All user application code is developed within the Workshop3 IDE. - 4D-Workshop3-IDE-Tool
FONT Software Tool: This is a free software tool that can assist in the conversion of any Windows fonts into the bitmap format that can be used by the PICASO-GFX2. The converted font set can then be imported into the user 4DGL application code. - FONT Tool link
RMPET Software Tool: Removable Media Partition Edit Tool (RMPET) can split a large card into two partitions, the first partition for use as a FAT16 partition and the second partition for use as a RAW partition. - RMPET Tool link
Graphics-Composer Software Tool: This is a free software tool for Windows. This software tool is an aid to composing a slide show of images/animations/movie-clips (multi-media objects) which can then be downloaded into the memory card that is supported by the PICASO-GFX2. The multimedia objects can then be called within the user application 4DGL program. - Graphics Composer Software
Touch Calibration: Calibration is necessary when the coordinates of the area touched on the screen are not sufficiently close to the coordinates on the display. Without proper calibration, software may not respond correctly when pressed.This 4DGL prgram allows the user to recalibrate and overwrite the existing Touch preset values. The new calibration values apply until the PmmC file is reloaded. Just download the program and follow the instructions. - TOUCHCAL.4dg
GFX or SGC
How To Decide Between GFX or SGC
The architecture of the base PICASO chip is such that it can be reconfigured to operate in 2 distinctively different ways. To configure the device, a PmmC (Personality Module Micro-Code) is downloaded via its serial port. There are 2 types of PmmC available for PICASO.
SGC PmmC: By loading the SGC (Slave Graphics Controller) PmmC, the module is 'ready to go' by simply connecting it to the serial port of your favourite micro-controller, and sending serial commands to it. The Serial Command Set for PICASO can be found here: PICASO-SGC-COMMANDS-SIS-rev9.pdf
GFX PmmC: By loading the GFX (Stand-Alone Graphics Controller) PmmC, the module is then like a microprocessor which you program, using the 4DGL language (very similar to C), to control the internal graphics and external interfaces. The 4DGL language command set and functions for PICASO can be found here: PICASO-GFX2-4DGL-Internal-Functions-rev3.pdf
At any time, you can reload the PICASO chip with either PmmC which allows you to explore the differences between the two configurations.
In general, documentation and PmmC's for both configurations (PICASO-SGC or PICASO-GFX2) for the uLCD-28PT module can be found in the 'Downloads' tab of each link here: uLCD-28PT(SGC) : with PICASO-SGC Slave configuration